| Specifications |
 View Brochure | Modular Rectifiers| Monitoring |
|
|
|
AC Input:
|
Three phase. (refer to RM series brochures for full details)
|
|
Frequency Range:
|
45-66Hz |
|
Power Factor:
|
>0.99 (full load) |
|
Termination:
|
Three phase L1, L2, L3, N, E 10mm² terminal blocks.
Surge protection. (40kA 8/20msec) |
|
|
|
DC Output
|
|
|
Nominal Voltage:
|
-48V |
|
Rated System Output Power:
|
14000W |
|
Polarity:
|
Positive earth. (negative earth available to special order) |
|
DC Distribution:
|
Load: 2x 10A, 6x 32A, 2x 50A load circuit breakers.
Battery: 4x 100A battery circuit breakers. |
|
Breaker Fail Detection:
|
Electronic fail detection on both load and battery breakers. |
|
DC Terminals: (rear connected)
|
Load: 16mm² tunnel terminals.
Battery: 35mm² tunnel terminals. |
| Low Voltage Disconnect: |
300A battery LVD fitted as standard. |
|
|
|
Mechanical
|
|
|
Dimensions, W, H, D:
|
482.6mm (standard 19” module), 222.2mm (5U, 8¾”), 350mm (13¾”) (390mm with cable strain relief) |
|
Weight:
|
14kg (excluding rectifier modules) |
|
|
| Monitoring & Control: |
Various monitoring options are available via the Enatel SM30 series of control & supervisory modules. Standard features include full temperature compensation, automated and manual battery testing/equalisation and three voltage-free relay alarm outputs. Options include extension I/O PCBs that give an extra 6x digital inputs, 6x analogue inputs and 8x voltage-free relay outputs. For further details, refer to the SM30 series brochures. |
