The FS9 Modular Motive Power Charger is a uniquely flexible solution to
suit almost any motive power battery charging requirement be it 24, 36,
48V, flooded, gel or AGM battery technology.
“Plug and play” installation of MP330 high performance power
modules to provide any output current up to 540A to suit charging up to
3000Ahr batteries.
Configuring the FS9 MMPC is as easy as selecting the number of power
modules required to achieve the recharge current required then configure
the MMPC’s built in controller with a simple software tool.
Our auto configure option allows you to simply connect any battery and
start charging immediately.
 View Specifications
 View Brochure
- High efficiency.
- High reliability.
- Flexible configuration.
- Intelligent.
- Fast & opportunity charge ready.
- Auto configure option.
- Network option.
- Rugged sheet metal housing.
- Flexible mounting; floor, rack (bolted).
- Large front panel indicators for simple charger status indication.
- Output fuse with reverse battery protection diode.
- Direct cable bolting to output bus bars.
- Dual SB350 generic output connectors, front or rear exit. (optional)
- Simple access to add or remove power modules.
- Easily serviced inlet air filter.
- Flexible AC configuration.
- Charger status, current, voltage & alarms always available. |
|
- Simple charger configuration by software or front panel.
- Auto/manual equalisation charge.
- Battery cable volt drop compensation.
- Battery temperature voltage compensation.
- Automatic adjustment of charge profile under power module fail.
- Extensive alarm monitoring of charger and battery. (200 events)
- Extensive protection against incorrect battery type or configuration.
- Extensive charge logging. (2400 charges)
- Audible alarm. (software configurable)
|
|
