FS9 SPECIFICATIONS - enatel.net
MOTIVE POWER
- FS9 MODULAR MOTIVE
POWER CHARGER
Adobe PDF Specifications
- FS3 MODULAR MOTIVE
POWER CHARGER
- FS1 MODULAR MOTIVE
POWER CHARGER


24/36/48V, 27.0kW, 540A max
ENVIRONMENTAL REQUIREMENTS
Ambient Temperature Range: -10ºC to +70ºC (maximum output power is auto derated above +40ºC and shuts down at +70ºC)
Storage Temperature: -20ºC to +70ºC.
Humidity: 5-95% RH. (non-condensing)
Altitude: <2500m, de-rate maximum ambient temperature by 4ºC per 1000m above sea level.
MECHANICAL
Dimensions, W, H, D: 340mm, 660mm, 440mm.
Weight: 40kg. (with 9 power modules) - TBD
Shipping Dimensions W, H, D: 400mm, 700mm, 500mm. - TBD
Shipping Weight: 42.5kg. - TBD
MP330 CHARGER MODULES
AC INPUT Three phase, no neutral. ph-ph
Nominal Input Voltage: 380-480V AC
Operating Voltage Range: 340-580V AC
Frequency Range: 45-65Hz >0.92PF
Typical Efficiency: Max. 93% @ 48V
Reduced Output Below: 340V AC
DC OUTPUT
Range: 25-65V DC
60A DC output up to 50V
52A DC output to 57.6V
Ripple: <2mV
Broadband Noise: 2mV (<100Hz)
  200mV p-p (0-20Mhz)
MECHANICAL
Dimensions, W, H, D: 340mm, 230mm, 52mm.
Weight: 2.65kg.
Cooling: Force cooled by dual temperature controlled high reliability fans.
Control: Microprocessor controlled with serial comms to charger controller.
COMPLIANCES
Safety: EN60335
EMC: EN61000-6-2, EN61000-6-4
AC Harmonics & Flicker: EN61000-3-2, EN61000-3-3
DIN 41773 part 1 charge characteristics programmed into the charger IUIa, IUUa, Ia, IUa
ACCESSORIES
APC-5: Auto profile configuration module.

Due to product development specifications are subject to change without prior notice. Pictures may be representative, actual products may differ.