|
|
|
|
|
FS1 MODULAR MOTIVE POWER CHARGER
| FEATURES & SPECIFICATIONS |
 View Brochure |
|
|
- Flexible.
- Robust & reliable.
- Serviceable.
- Small and light.
- Extremely high electrical performance.
- Simple user operation.
- Extensive service logging functions.
- Comprehensive alarm monitoring & logging.
- Simple sheetmetal housing for a single power module and a controller.
- Flexible mounting; wall, floor, rack.
- Output fuse with reverse battery protection diode.
- SB175 generic output connector, screw fixing option.
- Simple access to add or remove power modules.
- Readily serviced inlet air filter.
- Front panel display & push buttons.
|
- Front panel status LEDs and USB port.
- Simple user interface.
- Charger status, current, voltage & alarms always available.
- Simple adjustment of charge profile.
- Auto/manual equalisation charge.
- Battery cable volt drop compensation.
- Battery temperature voltage compensation.
- Automatic adjustment of charge profile under power module fail.
- Extensive alarm monitoring of charger and battery. (200 events)
- Protection against incorrect battery type.
- Protection against incorrect configuration.
- Extensive charge log information. (400 charges)
- Audible alarm. (software configurable)
- Daughter board option capability, for network
 connectivity or automatic configuration options. |
|
|
| ENVIRONMENTAL REQUIREMENTS |
|
|
|
| Ambient Temperature: |
-10ºC to +70ºC (maximum output power is auto derated above +50ºC and shuts down at +70ºC) |
| Storage Temperature: |
-20ºC to +70ºC |
| Humidity: |
5-95% RH (non-condensing) |
| Altitude: |
<2500m, De-rate maximum ambient temperature by 4ºC per 1000m above sea level. |
|
|
| MECHANICAL |
|
|
|
| Dimensions, W, H, D: |
438mm, 269mm, 116mm. |
| Weight: |
8kg. (with 1 power modules) |
| Shipping Dimensions, W, H, D: |
520mm, 320mm, 180mm. |
| Shipping Weight: |
10kg. |
|
|
| MP30 CHARGER MODULE |
|
|
|
| AC INPUT |
|
| Wide AC Input Range: |
90-300V AC |
| Frequency Range: |
45-65Hz >0.99PF |
| Typical Efficiency: |
Max. 93% @ 48V |
| Reduced Output Below: |
175V AC |
|
Able to withstand open circuit neutral. |
|
|
| DC OUTPUT |
|
| Range: |
25-65V DC |
|
60A DC output up to 48V |
|
52A DC output to 57.6V |
| Ripple: |
<1mV |
| Broadband Noise: |
<50mV p-p |
|
|
| MECHANICAL |
|
| Dimensions, W, H, D: |
340mm, 230mm, 52mm. |
| Weight: |
2.65kg. |
| Cooling: |
Force cooled by dual temperature controlled high reliability fans. |
| Control: |
Microprocessor controlled with serial comms to charger controller. |
|
|
| COMPLIANCES |
|
|
|
| Safety: |
EN60950 |
| EMC: |
CISPR24, CISPR22 |
| AC Harmonics & Flicker: |
EN61000-3-2, EN61000-3-3 |
| Other: |
CE, RoHS |
|
|
|
DIN 41773 part 1 charge characteristics programmed into the charger IUIa, IUUa, Ia, IUa |
|
|
Due to product development specifications are subject to change without prior notice. Pictures may be representative, actual products may differ. |
